Hello guy's
Can anyone PLEASE help reguarding this situation.
I need 2 metric universal joints measuring 20 mm. (diamameter ) by 44 mm Overal length,Thats measured with both the caps on the trunion...PLEASE advise ASAP
thanks Bruce
universal joints METRIC
2 posts • Page 1 of 1
universal joints METRIC
by ezmoneybruce » Wed Nov 04, 2009 11:23 am
- ezmoneybruce
- Posts: 1
- Joined: Wed Nov 04, 2009 11:15 am
Re: universal joints METRIC
by accu tech » Thu Nov 05, 2009 11:59 am
The dimensions you listed are somewhat small compared to more common automotive u-joint sizes.
The closest joint that we could find was 20.6mm dia cap with 44mm across (Spicer #050576000, but even these were unavailable and had no eta from the manufacturer.
Sorry we couldn't be much more help in this case. Good Luck.
-Tech
The closest joint that we could find was 20.6mm dia cap with 44mm across (Spicer #050576000, but even these were unavailable and had no eta from the manufacturer.
Sorry we couldn't be much more help in this case. Good Luck.
-Tech
- accu tech
- Posts: 82
- Joined: Tue Jun 09, 2009 12:52 pm
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest