4.56 carrier
4 posts • Page 1 of 1
4.56 carrier
by bud300ft » Thu Jul 22, 2010 1:30 pm
bought dana60 carrier from you suppose to 4.56 and up what is the measurement from where bolts up to ring gear to bearing on short side of carrier should
- bud300ft
- Posts: 2
- Joined: Thu Jul 22, 2010 1:23 pm
Re: 4.56 carrier
by bud300ft » Mon Aug 02, 2010 9:57 am
4.56 and up carrier should measure 2and 7/16 in from ring gear to bearing mine measures 2 and 1/8 2and 3/16
- bud300ft
- Posts: 2
- Joined: Thu Jul 22, 2010 1:23 pm
Re: 4.56 carrier
by accu tech » Mon Aug 02, 2010 10:54 am
The carrier was a 4 series carrier removed from a 2000+ F450 front Dana 60 with a factory 4.88 ratio.
If you are unable to use the assembly we will have UPS pick it up and issue full credit.
-Accu Tech
AAC/AAP
If you are unable to use the assembly we will have UPS pick it up and issue full credit.
-Accu Tech
AAC/AAP
- accu tech
- Posts: 185
- Joined: Tue Jun 09, 2009 12:52 pm
4 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest